12.6 C
New York
Wednesday, October 5, 2022

Aerial additive manufacturing with multiple autonomous robots


  • Lim, S. et al. Developments in construction-scale additive manufacturing processes. Autom. Constr. 21, 262–268 (2012).

    Article 

    Google Scholar
     

  • Gosselin, C. et al. Giant-scale 3D printing of ultra-high efficiency concrete-a new processing route for architects and builders. Mater. Design 100, 102–109 (2016).

    Article 

    Google Scholar
     

  • Keating, S., Leland, J., Cai, L. & Oxman, N. Towards site-specific and self-sufficient robotic fabrication on architectural scales. Sci. Robotic. 2, 15 (2017).

    Article 

    Google Scholar
     

  • Buswell, R., Silva, W., Jones, S. & Dirrenberger, J. 3D printing utilizing concrete extrusion: a roadmap for analysis. Cem. Concr. Res. 112, 37–49 (2018).

    CAS 
    Article 

    Google Scholar
     

  • The twenty first Century Revolution in Constructing Expertise Has A Identify (Monolite Ltd, 2009); https://www.cadblog.pl/podcasty/luty_2012/d_shape_presentation.pdf

  • BigDelta WASP 12MT. WASP https://www.3dwasp.com/en/giant-3d-printer-bigdelta-wasp-12mt (2016).

  • Sustarevas, J. et al. MAP-a cell agile printer robotic for on-site building. In Proc. 2018 IEEE/RSJ Worldwide Convention on Clever Robots and Methods (IROS) 2441–2448 (IEEE, 2018).

  • Zhang, X. et al. Giant-scale 3D printing by a staff of cell robots. Autom. Constr. 95, 98–106 (2018).

    Article 

    Google Scholar
     

  • Off-site Manufacture for Building: Constructing for Change (Home of Lords Science and Expertise Committee, 2018); https://publications.parliament.uk/pa/ld201719/ldselect/ldsctech/169/16902.htm

  • Khoshnevis, B. Automated building by contour crafting associated robotics and knowledge applied sciences. Autom. Constr. 13, 5–19 (2004).

    Article 

    Google Scholar
     

  • Hansell, M. Constructed by Animals: the Pure Historical past of Animal Structure (OUP, 2007).

  • Theraulaz, G., Bonabeau, E. & Deneubourg, J. The mechanisms and guidelines of coordinated constructing in social bugs. In Info Processing In Social Bugs (eds Detrain, C. et al.) 309–330 (Birkhäuser, 1999).

  • Petersen, Ok., Napp, N., Stuart-Smith, R., Rus, D. & Kovac, M. A overview of collective robotic building. Sci. Robotic. 4, eaau8479 (2019).

  • Delgado, J. et al. Robotics and automatic methods in building: understanding industry-specific challenges for adoption. J. Construct. Eng. 26, 100868 (2019).

    Article 

    Google Scholar
     

  • Tay, Y. et al. 3D printing developments in constructing and building {industry}: a overview. Digital Phys. Prototyp. 12, 261–276 (2017).

    Article 

    Google Scholar
     

  • Lindsey, Q., Mellinger, D. & Kumar, V. Building of cubic constructions with quadrotor groups. In Robotics: Science And Methods VII 177–184 (MIT Press, 2012).

  • Mirjan, A., Augugliaro, F., D’Andrea, R., Gramazio, F. & Kohler, M. in Robotic Fabrication In Structure, Artwork And Design 2016 (eds Reinhardt, D. et al.) 34–47 (Springer, 2016).

  • Stuart-Smith, R. Behavioural manufacturing: autonomous swarm-constructed structure. Archit. Des. 86, 54–59 (2016).


    Google Scholar
     

  • Furrer, F. et al. Autonomous robotic stone stacking with misc subsequent finest object goal pose planning. In 2017 IEEE Worldwide Convention On Robotics And Automation (ICRA) 2350–2356 (IEEE, 2017).

  • Kayser, M. et al. Design of a multi-agent, fiber composite digital fabrication system. Sci. Robotic. 3, eaau5630 (2018).

    Article 

    Google Scholar
     

  • Hutter, M. et al. in Subject And Service Robotics (eds Hutter, M. & Siegwart, R.) 575–589 (Springer, 2018)

  • Chermprayong, P., Zhang, Ok., Xiao, F. & Kovac, M. An built-in delta manipulator for aerial restore: a brand new aerial robotic system. IEEE Robotic. Autom. Magazine. 26, 54–66 (2019).

    Article 

    Google Scholar
     

  • Bellingham, J. & Rajan, Ok. Robotics in distant and hostile environments. Science 318, 1098–1102 (2007).

    ADS 
    CAS 
    Article 

    Google Scholar
     

  • Helm, V., Ercan, S., Gramazio, F. & Kohler, M. Cell robotic fabrication on building websites: DimRob. In IEEE/RSJ Worldwide Convention on Clever Robots And Methods (IROS) 4335–4341 (IEEE, 2012).

  • Werfel, J., Petersen, Ok. & Nagpal, R. Designing collective conduct in a termite-inspired robotic building staff. Science 343, 754–758 (2014).

    ADS 
    CAS 
    Article 

    Google Scholar
     

  • Willmann, J. et al. Aerial robotic building in direction of a brand new subject of architectural analysis. Int. J. Archit. Comput. 10, 439–459 (2012).


    Google Scholar
     

  • Augugliaro, F. et al. The flight assembled structure set up: cooperative building with flying machines. IEEE Management Syst. Magazine. 34, 46–64 (2014).

    MathSciNet 
    Article 

    Google Scholar
     

  • Minibuilders. IAAC https://iaac.internet/mission/minibuilders/ (2016).

  • Speich, S., Jones, H. & Benedict, E. Evaluation of the pure nesting of the barn swallow in North America. Am. Midl. Nat. 115, 248–254 (1986).

  • Miriyev, A. & Kovač, M. Abilities for bodily synthetic intelligence. Nat. Mach. Intell. 2, 658–660 (2020).

    Article 

    Google Scholar
     

  • Zareiyan, B. & Khoshnevis, B. Interlayer adhesion and energy of constructions in contour crafting-effects of combination measurement, extrusion fee, and layer thickness. Autom. Constr. 81, 112–121 (2017).

    Article 

    Google Scholar
     

  • Zareiyan, B. & Khoshnevis, B. Results of combination substances on interlayer adhesion of concrete in contour crafting. Fast Prototyp. J. 24, 584–592 (2018).

  • Le, T. et al. Combine design and recent properties for high-performance printing concrete. Mater. Struct. 45, 1221–1232 (2012).

    CAS 
    Article 

    Google Scholar
     

  • Wangler, T. et al. Digital concrete: alternatives and challenges. RILEM Tech. Lett. 1, 67–75 (2016).

    Article 

    Google Scholar
     

  • Lloret Fritschi, E. Sensible Dynamic Casting-a Digital Fabrication Technique for Non-standard Concrete Constructions (ETH Zurich, 2016).

  • Hack, N. et al. Mesh mould: an on website, robotically fabricated, purposeful formwork. In Proceedings of eleventh Excessive Efficiency Concrete (eleventh HPC) and Second Concrete Innovation Convention (2nd CIC) (ed Hammer, T. A.) 330–340 (2017).

  • Bos, F., Wolfs, R., Ahmed, Z. & Salet, T. Additive manufacturing of concrete in building: potentials and challenges of 3D concrete printing. Digital Phys. Prototyp. 11, 209–225 (2016).

    Article 

    Google Scholar
     

  • Bos, F., Ahmed, Z., Jutinov, E. & Salet, T. Experimental exploration of metallic cable as reinforcement in 3D printed concrete. Supplies 10, 1314 (2017).

    ADS 
    Article 

    Google Scholar
     

  • Wolfs, R., Bos, F. & Salet, T. Early age mechanical behaviour of 3D printed concrete: numerical modelling and experimental testing. Cem. Concr. Res. 106, 103–116 (2018).

    CAS 
    Article 

    Google Scholar
     

  • Ghaffar, S., Corker, J. & Fan, M. Additive manufacturing know-how and its implementation in building as an eco-innovative resolution. Autom. Constr. 93, 1–11 (2018).

    Article 

    Google Scholar
     

  • Barnett, E. & Gosselin, C. Giant-scale 3D printing with a cable-suspended robotic. Addit. Manuf. 7, 27–44 (2015).

    CAS 

    Google Scholar
     

  • Subrin, Ok. et al. Enchancment of the cell robotic location devoted for liveable home building by 3D printing. IFAC-PapersOnLine 51, 716–721 (2018).

    Article 

    Google Scholar
     

  • Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S. & Ng, S. Hydration and rheology management of concrete for digital fabrication: potential admixtures and cement chemistry. Cem. Concr. Res. 112, 96–110 (2018).

    CAS 
    Article 

    Google Scholar
     

  • Vespa, E., Funk, N., Kelly, P. & Leutenegger, S. Adaptive-resolution octree-based volumetric SLAM. In 2019 Worldwide Convention On 3D Imaginative and prescient (3DV) 654–662 (IEEE, 2019).

  • Jiao, D. et al. Impact of constituents on rheological properties of recent concrete—a overview. Cem. Concr. Compos. 83, 146–159 (2017).

    ADS 
    CAS 
    Article 

    Google Scholar
     

  • Lootens, D., Hébraud, P., Lécolier, E. & Van Damme, H. Gelation, shear-thinning and shear-thickening in cement slurries. Oil Gasoline Sci. Technol. 59, 31–40 (2004).

    CAS 
    Article 

    Google Scholar
     

  • Studart, A. Additive manufacturing of biologically-inspired supplies. Chem. Soc. Rev. 45, 359–376 (2016).

    CAS 
    Article 

    Google Scholar
     

  • Chen, M. et al. Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious supplies. Constr. Construct. Mater. 189, 601–611 (2018).

    CAS 
    Article 

    Google Scholar
     

  • Group, C. Nationwide Structural Concrete Specification for Constructing Building (British Cement Affiliation, 2000).

  • Ander, M., Olsson, J., Shepherd, P., Stuart-Smith, R. & Williams, C. A constructing of limitless peak. Proc. IASS Annu. Symp. 2019, 1465–1472 (2019).


    Google Scholar
     

  • Related Articles

    Latest Articles